You know how you say you will not spend more money anymore on RC, well i tried and failed miserably , again.
these two packages arrived this week , the first on monday , the second on thursday .
lets start with the first :
GPM bits for the Dual Hunter:
2x WD028B Tamiya Wild Dagger Aluminum Front/rear Damper Mount With Collars & Screws Blue
1x TT024G Tamiya TT-01 Aluminum Servo Mount With Collars+lock Nuts+screws Set Green
1x TT010OR Tamiya TT-01 Aluminum Wheel Hex Drive Adaptor With Pins & Screws – 4pcs Set Orange
and for the two TA03f
2x Tamiya 53268 TA03 Urethane Bumper Set for TA03F (at a super price, the lowest i could find)
and the second:
from Hobbyking with a short stop at Slovenian customs:
1x #9052000020/23361 Turnigy TrackStar 10.5T Sensored Brushless Motor 3250KV = $33.46
1x #XT60/9572 Nylon XT60 Connectors Male/Female (5 pairs) GENUINE = $3.19
1x #HKSS-prog/10458 Hobby King HKSS programming card for HK 150A ESC = $5.45
1x #AM1003A/67 4mm Gold Connectors 10 pairs (20pc) = $1.90
1x #WH-4MM-BLACK/3832 Turnigy 4mm Heat Shrink Tube – BLACK (1mtr) = $0.00
1x #WHS-4MM-RED/5277 Turnigy 4mm Heat Shrink Tube – RED (1mtr) = $0.00
1x #Sensor200mm/18740 200mm Sensor Lead with Mesh Guard = $1.49
1x #HK-SENS-60A/17232 Hobby King 60A Sensored/Sensorless Car ESC (1:10/1:12) = $38.23
1x #T1450-TX-3/9787 Turnigy 1450mAh 3S 11.1v Transmitter Lipoly Pack = $7.69
1x #XD-KP-237/9333 X-BLADE Spare SK-5 Steel blades (10pcs/set) = $0.99
2x #ES-05-6mm/9568 Wire Mesh Guard Orange 6mm (1mtr) = $0.98
The ESC and brushless will go into the Blitzer Beetle , the receiver pack into the GT3b , the rest was padding, oh and xt60 connectors .
Upgrade posts on the Dual Hunter and Blitzer Beetle will follow shortly.