finally finished the wheel base for the cherokee, thank god the m4 threaded rod is cheap, because i’ve probably made about 3 sets of lower links until i was completely satisfied with it. I have also converted the scx10 to a 4 link. Some how i’ve managed to miscalculate the amount of rod ends i need , so the front upper links are on spare axial rod ends i had left over from the Wraith. im also running low on the aluminium tube , so the upper links are bare atm, i will cover them with nitro tubbing or aluminium ones, which ever comes first.
next on the agenda , cut the front and rear bumper sections of the body so it fits better , also raise the bumper up a notch so it doesn’t get stuck on everything. replace the servo and wire in the BEC and maybe get some driving done , before the first snowfalls happen