finally finished the wheel base for the cherokee, thank god the m4 threaded rod is cheap, because i’ve probably made about 3 sets of lower links until i was completely satisfied with it. I have also converted the scx10 to a 4 link. Some how i’ve managed to miscalculate the amount of rod ends i need , so the front upper links are on spare axial rod ends i had left over from the Wraith. im also running low on the aluminium tube , so the upper links are bare atm, i will cover them with nitro tubbing or aluminium ones, which ever comes first.

standing properly at last


next on the agenda , cut the front and rear bumper sections of the body so it fits better , also raise the bumper up a notch so it doesn’t get stuck on everything.  replace the servo and wire in the BEC and maybe get some driving done , before the first snowfalls happen


Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

%d bloggers like this: