The electronics for the Sawback are now finalized and installed:
– Savox SC-0251 MG Servo
– Axial AE-2 ESC
– Mabuchi 540SH 27 turn motor
– Castle 10Amp BEC
The ESC i got used from a friend , its a Castle Sidewinder basically , great little ESC , The motor is a stand in until i can get my hands on a 35t, the servo i had planed for the next scaler project, its running on 6v coming from a Castle BEC.
i drilled a new hole on the front of the chassis and moved the front fixed shackle back a bit , this shortens the wheelbase a bit .
the body does not sit right at the moment , because the front is too high , so next step will be the cutting.