Electronics and Drilling … Sawback built pt8

The electronics for the Sawback are now finalized and installed:

– Savox SC-0251 MG Servo

– Axial AE-2 ESC

– Mabuchi 540SH 27 turn motor 

– Castle 10Amp BEC



The ESC i got used from a friend , its a Castle Sidewinder basically , great little ESC , The motor is a stand in until i can get my hands on a 35t, the servo i had planed for the next scaler project, its running on 6v coming from a Castle BEC.



i drilled a new hole on the front of the chassis and moved the front fixed shackle back a bit , this shortens the wheelbase a bit .



the body does not sit right at the moment , because the front is too high , so next step will be the cutting.


Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

%d bloggers like this: