trimmed Knuckles… Sawback high steering mod

20140418-knuckled1

I’ve received some LEDs and a set of GPM Tamiya DF03 knuckles , which are not for the DF03 but are used as High steering knuckles for the Sawback.

20140418-knuckled2

The stock knuckle is just a 1mm narrower than the Df03 one , so all you need to do is grind down half a millimeter on both sides and it fits perfectly .

20140418-knuckled3

i’ve used a m3 nut to raise the steering link over the leaf , now i need a longer steering horn because the steering link hits the nut on the right side full compression.

 

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: