Category Archives: Mojca’s SCX10

Season Recap 2015 aka the post G6 carnage report !

Here it is the end of the season recap.

I managed to finish more events that i started in but i still DNFed in both G6 this year, in Austria after gate 1 because of a stupid stupid error with the soldering on the transmitter (note to self , bring spare car next year and change transmitter) and in Italy , about 20 gates before the end because of a broken panhard mount, but i had lots of fun that day and i did loose my fear of water.

But on the other hand, Mojca won both the women’s classes and is the Driving Diva of Europe 2015 !!!!!!!

We also competed in our first Sorcca event , and we did fine, i managed a clean second stage but badly explained rules by the italians meant first stage was a write off .

I also attended the ASTS final in Retz and it is still amazing . Lukas set a super difficult course .

So lessons learned :

  • always carry a plastic bag with you
  • buy proper transmitter
  • build even tougher
  • build trucks to the rules
  • bring a spare car
  • and spare everything if possible
  • buy better tent pegs for Ersberg !
  • those pesky scale nuts
  • night runs are awesome !

Cue the pictures, mostly courtesy of Sandra, my dedicated Polish photographer.

20150829-2015carnagereport1

20150829-2015carnagereport2

20150829-2015carnagereport11

20150829-2015carnagereport3

20150905-2015carnagereport4

20150905-2015carnagereport6

20150905-2015carnagereport5

20150906-2015carnagereport7

20150906-2015carnagereport10

20150906-2015carnagereport9

20150926-2015carnagereport1 20150926-2015carnagereport2 20150926-2015carnagereport3

 

 

Czech CEST 2015

Yesterday we got back from a 4 day trip to  the Czech event in Central European Scale Trophy in Dekanske Skaly in the Czech Republic. It was a blast !

20150801-CZCEST5

I got Second place in Class 2 / Ultimate and so did the team we were in . If Mojca didn’t get the penalised for lacking lights and accessories she would have won the class as she had a clean event and i had 3 gate touches .

20150801-CZCEST6

We started after a group of LandRovers which were nice and all, but they had to winch themselves all over the place, which takes time. So the stage lasted 4 hours instead of 1.

20150804-CZCEST7

Nothing broke on both our trucks. Mojca’s winch got snagged at one point, but she did manage to fix it .

20150804-CZCEST8

The Cherokee can keep up with class 2 vehicles even though the tires are lower , the TCS skid plate helps a lot .

20150801-CZCEST3

I feel i have to practice a bit more on the steeper decent, thats the only area I had issues with because of lack of confidence in me and not the truck.

20150801-CZCEST4

The Servo Winch works great , only thing I could want is a bit more line speed.

20150804-CZCEST1

Its time to start preparing for the next one , the Austrian G6 in 4 weeks time .

EDIT:

a video of almost all video material I made before my Xiaomi YI lost power.

 

 

Heat wave

The current heat wave of 35 degrees celsius is putting a serious dent into my life , not to mention RC .

But we did manage a nice 2 hour trail and crawl at an amazing location on Vrsic pass.

20150719-heatwave3

its a nice very nice location accessible by car an hour and something away from Ljubljana. the mountain pass is at 1611 meters height, so the temperature was a nice 25 degrees celsius.

20150719-heatwave4

we made it up a trail for about 150 meters then turned back on a different route . the terrain was nice, quite steep , lots of rocks and lots of fine dust which wrecked havoc with traction at points.

20150719-heatwave5

Mojca is running a new set of the 1.9 Falken wild peaks on her G6 jeep and the extra height was quite noticeable compared to the Cherokee. I had to use the throttle on some sections to slide it over. Mojca also runs a new Tower Pro MG968 DIGI 2 servo. with its 24kgs of torque it was so strong it first bent the rod end on the steering link, then eventually it broke it . The whole link will get replaced with the traxxas revo rod ends. Mojca is finally getting used to the sliders which don’t bend.

20150719-heatwave2

 

Whilst Mojca was having problems with the rod end popping of , i popped a bead . I guess the nuts got loose, but I reseated the bead on the trail and made it fine to the end. The tires are getting pretty chewed up, Thew will have to last for the Czech event , but for the G6 pair, a new set should be on order .

20150719-heatwave6

It was a great little Sunday trip, which served as an indicator on what to fix and tweak before the Czech event .

 

 

The season begins

its a late start, but the first trail of the season is complete .

20150504-newseason4

The bluemonkey CMS on the Cherokee works great , did not notice a lack of performance. It performed just as good it did with a servo on axle at last years G6 . i will go with a stronger servo in the future, the CMS does seem a bit more taxing on it.

20150504-newseason2

the DivaMobil (working name) performs great , the small tweaks it got during the building and the great foams from CI make it a great climber, also its making me want new tires on the Cherokee. The extra height makes a difference . Mojca’s driving is also really good, a couple more tweaks and it will be ready for G6 glory (its a bit top heavy at the moment)

20150504-newseason6

The Winch motor went dead ,so no winching this time . The inner fenders passed the test and need painting . the rear brace needs a bit of fiddling with, also some new tires and shocks will be ordered soon.

20150504-newseason1

On the DivaMobil there is an extensive list of things to be done : , the front lights, fit the winch , make the inner fenders, lower the COG …

 

 

The state of the projects

Its time for a status update on whats what.

the Cherokee is kinda finished but looks in pieces.

20150406-statusreport4

i need to install the new servo winch controller when it arrives as the small 10A ESC went up in smoke after I installed the Locked up RC spool and line

20150406-statusreport2

 

The servo is sitting on a bracket ,so the spool is raised out of the way of the panhard. I also went with some new winch line

20150406-statusreport3

i fiddled around with the panhard some more and i think i have the desired rod length and angle , i might change it to a solid rod instead of the threaded rod one.

20150406-statusreport5

There is also Mojca’s SCX10 for the new season , which she built herself. a detailed writeup on it will follow when its completed, it should be very capable.

20150406-fj40begining1

There is also my new project , the FJ40 Ascender . Not much done to it yet, but I really enjoyed building the kit itself . 20150406-fj40begining5

it might have a few shortcomings , but look at that steering angle out of the box !

%d bloggers like this: